New FD22 Form - TateForms

FIRE ALARM ACCEPTANCE CERTIFICATE BS5839 – 1: 2025

Reference No:

Serial Number (if required):

Certificate of acceptance for the fire detection and fire alarm system at:

I/we being the competent person(s) responsible (as indicated by my/our signatures below) for the acceptance of the fire detection and fire alarm system, particulars of which are set out below, ACCEPT the system on behalf of:

Name (in block letters):

Position:

Date:

For and on behalf of:

Address:

Postcode:

Extent of system covered by this certificate: The extent of liability of the signatory is limited to the system described below.

System Compliance Checks

All installation work appears to be satisfactory.

The system is capable of giving a fire alarm signal.

The facility for remote transmission of alarms to an alarm receiving centre operates correctly. (Delete if not applicable.)

A suitable zone plan (or other suitable diagrammatic representation) of the premises is provided on or adjacent to all control and indicating equipment. (Delete if not applicable.)

The following documents have been provided to the purchaser or user:

As-fitted drawings.

Operating and maintenance instructions.

Certificates of design, installation and commissioning.

A logbook.

Electrical Installation Certificate in accordance with BS 7671 for the supply to all mains related wiring.

Sufficient representatives of the user have been properly instructed in the use of the system, including, at least, all means of triggering fire signals, silencing and resetting the system and avoidance of false alarms.

All relevant tests, defined in the purchasing specification, have been witnessed. (Delete if not applicable.)

FD22 - Fire Alarm Acceptance Certificate

FIRE ALARM ACCEPTANCE CERTIFICATE BS5839 – 1: 2025